The 10-Minute Safety Walk in a Machine Shop: Cylinders, Chips, Cables, Guards
What should a machine shop owner check on a 10-minute walk? Seven visible things: gas cylinders, chips and coolant on the floor, loose cables, removed guards, blocked aisles and exits, reachable stop buttons, and eye protection at grinders. Each maps to a duty in the OSH Code, 2020, in force since 21 November 2025, or to the Gas Cylinders Rules, 2016.
Last checked: 17 Oct 2026. By the Mama Editorial Team, for the owner who walks the floor. Legal lines quote the primary text; rupee figures are statutory amounts or labelled assumptions.
Key takeaways
- Seven items, about a minute and a half each. A visual check, not an audit or a competent person's inspection.
- The Gas Cylinders Rules, 2016 do not use the word "chain". Rule 18(5) says LPG and liquefiable-gas cylinders must be kept upright and "so placed that they cannot be knocked over"; rule 18(3) says no cylinder may "fall upon one another" (PESO text, checked 17 Oct 2026). A chain, clamp or stand is one way to meet that.
- The OSH Code puts the general duty on the employer. Section 6(2)(d) covers safe places of work and safe "means of access to, and egress from" them. Section 13(e) bars employees from wilfully interfering with safety appliances.
- The expensive outcome is the stoppage, not only the fine. Under section 38, an inspector who sees "serious hazard or imminent danger" can prohibit work in that part of the factory for three days, extendable. On our assumptions, three days on six machines costs about ₹2.85 lakh.
- A camera sees some of this. Guards off and blocked aisles show on video; a gas leak or a jumpered interlock does not.
Why walk, when you already have cameras
The 10-minute morning camera check is about yesterday's production. This walk is about today's floor, on foot, at the start of the shift. On foot you catch what a fixed angle misses: the cylinder behind a pillar, the pool under a chip conveyor, a hissing regulator. Walk the same route daily, so a change stands out.
The walk at a glance
| # | Where you stand | What you look for | Rule it relates to | Time (min) |
|---|---|---|---|---|
| 1 | Welding and heat-treatment bay | Cylinders upright, secured, away from heat | Gas Cylinders Rules 2016, rr.18 and 21; OSH Code s.6(2)(b) | 1.5 |
| 2 | Turning and milling rows | Chips and coolant on the walking floor | OSH Code s.6(2)(d); Second Schedule item (12) | 1.5 |
| 3 | Panel side and machine feeds | Loose cables, damaged leads, taped joints | OSH Code s.6(2)(a); Second Schedule item (17) for hand lamps | 1.5 |
| 4 | Presses, grinders, saws | Guards in place, interlocks not wedged or bypassed | OSH Code s.6(2)(a), s.13(e); Second Schedule item (1) | 2 |
| 5 | Main aisle to the exit doors | Pallets, bins or WIP blocking the aisle or an exit | OSH Code s.6(2)(d) | 1.5 |
| 6 | Each machine's operator position | Emergency stop and isolator reachable, not hidden | Second Schedule item (4) | 1 |
| 7 | Grinders and deburring | Eye protection worn at the point of danger | Second Schedule item (15); s.6(2)(c) | 1 |
The Second Schedule items are the "list of matters" on which the Central Government declares safety standards under section 18(2)(f) of the OSH Code, 2020. For a factory, section 2(1)(d) makes the State the appropriate Government. So your working rules are your state's. Where the state has not finalised rules under the Code, section 143(3) keeps the old rules and notifications in force "to the extent they are not contrary" to it.
1. Gas cylinders: upright, secured, away from heat
A shop that cuts with oxy-acetylene holds both gases. The Gas Cylinders Rules, 2016 (G.S.R. 1081(E), 22 Nov 2016, PESO bilingual text) set the handling and storage duties.
Rule 18(3) applies to every cylinder: they "shall be handled carefully and not be allowed to fall upon one another or otherwise subjected to any undue shock." Rule 18(5) says LPG cylinders and cylinders of liquefiable gases "shall always be kept in an upright position and shall be so placed that they cannot be knocked over." Rule 18(6) says cylinders used horizontally "shall be so secured that they cannot roll." For acetylene, rule 21(3) bars stacking dissolved-gas cylinders horizontally. Rule 18(7) prohibits open flames, welding and smoking close to flammable-gas cylinders, except those in use for welding, cutting or heating. On the OSH side, section 6(2)(b) covers safe "use, handling, storage and transport of articles and substances".
Rule 21 covers storage. Cylinders go in "a cool, dry, well ventilated place under cover, away from boilers, open flames, steam pipes or any potential sources of heat" (r.21(1)). Flammable and toxic cylinders are kept apart from each other and from other gases (r.21(4)). Cylinders are not stored "along with any combustible material" (r.21(6)), and empties are segregated from full ones with valves shut (r.21(7)).
Rule 44(b) sets own-use limits below which no PESO licence is needed (see the FAQ).
On foot: every cylinder upright and held, nothing combustible beside them, full and empty apart.
2. Chips and coolant on the walking floor
The legal hook is general. Section 6(2)(d) of the OSH Code requires "the maintenance of all places of work in the workplace in a condition that is safe and without risk to health". The Second Schedule lists "floors, stairs and means of access" (item 12) as a matter for standards.
On foot, look under chip conveyors, at each CNC's coolant tank and where operators stand to unload. A pool there every morning means a leak or a failed tray.
3. Loose cables and temporary leads
The OSH Code requires "the provision and maintenance of plant and systems of work in the workplace that are safe and without risk to health" (s.6(2)(a)). For hand lamps on temporary leads, the Second Schedule names "precautions regarding the use of portable electric light" (item 17); it has no separate item on wiring.
On foot, look for leads across gangways, taped joints, cables lying in coolant and open panel doors. A panel is also where one fault stops ten machines.
4. Guards removed, swung clear or bypassed
"Fencing of machinery" is item 1 of the Second Schedule. The employer duty sits in section 6(2)(a). The employee duty sits in section 13(e): every employee shall "not wilfully interfere with or misuse or neglect any appliance, convenience or other thing provided at workplace for the purpose of securing the health, safety and welfare of workers."
On foot, look at the guard, then at the interlock: a guard with its switch wedged or jumpered gives no protection. On presses, check that no two-hand button is tied down. The press-shop article covers the four repeat behaviours in detail. For where cameras help and where a rated guard must come first, see machine guarding and danger-zone detection.
5. Aisles and exits blocked
Section 6(2)(d) requires "means of access to, and egress from, such places as are safe and without such risk". In a busy shop: a marked main aisle with nothing parked in it, and exit doors that open.
On foot, walk the fire-evacuation route: WIP bins, pallets, scrap drums, locked or blocked exit doors. For fire-exit coverage on cameras, see fire and emergency exit monitoring.
6. Emergency stops and isolators within reach
The Second Schedule names "striking gear and devices for cutting off power" (item 4). On foot, check that no stop button is covered by a tray, bin or rag, and that isolators are labelled and unblocked.
7. Eye protection at the point of danger
The Second Schedule lists "protection of eyes" (item 15). Section 6(2)(c) requires "such information, instruction, training and supervision as are necessary to ensure the health and safety of all employees at work."
On foot, at grinders and deburring benches, the question is not whether goggles were issued but whether they are on faces at the wheel.
What a stoppage costs: a worked ₹ example
Assume a 40-machine CNC and press shop in Haryana running two 8-hour shifts. Assume each stopped machine-hour loses ₹900 of contribution; this is an assumption, so work out your own figure with the machine-hour rate calculator. For wages, assume ₹710 a day for a skilled operator (₹18,460 a month over 26 days; illustrative); take the current notification for your trade and zone from your state labour department (Haryana Labour Department). That is ₹88.75 per hour over an 8-hour day. Assume operators are paid for the stopped hours.
| Walk item missed | Assumed event | Machine-hours stopped (assumed) | Contribution lost (₹, at ₹900/h) | Wages for idle hours (₹, at ₹88.75/h) | Total (₹) |
|---|---|---|---|---|---|
| 1. Cylinder unsecured | Cylinder falls, regulator damaged, bay cleared for 2 h, 8 machines | 16 | 14,400 | 1,420 | 15,820 |
| 2. Coolant pool | Slip, first aid and clean-up, 4 machines stopped 1.5 h | 6 | 5,400 | 533 | 5,933 |
| 3. Damaged lead | Fault trips a panel feeding 10 machines for 3 h | 30 | 27,000 | 2,663 | 29,663 |
| 4. Guard bypassed | Section 38 prohibition on that section: 3 days, 6 machines, 16 h/day | 288 | 2,59,200 | 25,560 | 2,84,760 |
| 7. No goggles at grinder | Eye injury, grinder and operator out for one shift | 8 | 7,200 | 710 | 7,910 |
The fourth row uses the legal period: a section 38(1)(A) prohibition order has "effect for a period of three days until extended by the Chief Inspector-cum-Facilitator".
The fines in the Code sit on top of the stoppage. Section 94 sets a general penalty of not less than ₹2 lakh and up to ₹3 lakh, plus up to ₹2,000 a day for a contravention continued after conviction. Section 103(1)(b) provides, where a contravention results in serious bodily injury, imprisonment up to one year or a fine of ₹2 lakh to ₹4 lakh, or both. A blocked exit (item 5) has no machine-hour row; a contravention there falls under the section 94 range.
On foot or on camera: what each can see
| Item | Visible on a fixed camera | Needs a person on foot |
|---|---|---|
| Cylinders | Standing or lying, near a heat source, count | Chain tight, regulator hiss, smell of gas |
| Chips and coolant | Large pools, chip heaps in the aisle | Thin oil film, sharp swarf at boot level |
| Cables | Leads across the gangway, open panel doors | Cracked sheath, warm joint, taped splice |
| Guards | Guard off or swung clear, hand in the die zone | Interlock wedged or jumpered behind the guard |
| Aisles and exits | WIP in the aisle, pallet against a door | Door locked, door that will not open |
| Stop buttons | Tray or bin in front of the button | Button that does not latch |
| Eye protection | Goggles on or off, if the angle is close | Scratched or wrong lenses |
Cameras show patterns, such as how often an aisle is blocked or which press runs with its guard swung clear. They cannot test a stop button or smell gas.
Limits of this walk
The walk does not replace pressure-plant, electrical or lifting-tackle examinations or statutory inspections. Section 22(2) of the Code requires safety officers in a factory with 500 or more workers, or 250 or more where a hazardous process is carried on; their work is deeper than this.
In the published OSH Code text, no rule was found that fixes how often an owner must walk the floor (checked 17 Oct 2026). The habit is a management choice, not a legal form.
The walk checks conditions, not people. Where cameras cover these items, footage of recognisable workers is personal data under s.2(t) of the DPDP Act, 2023; tell workers in writing what is recorded and why (see the worker CCTV notice under DPDP).
Where Mama fits
Mama reads the cameras a plant already has and every morning sends the owner a short plain-language note on where machines stood idle yesterday and why output leaked, counting machines and flows, not people. A press that keeps stopping because its guard is swung clear shows up first as lost hours. Leave an email or phone in the form below.
FAQ
Do the Gas Cylinders Rules say cylinders must be chained? Not in those words (PESO text, checked 17 Oct 2026). Rules 18(3), 18(5) and 18(6) require cylinders not to fall, to stand so they "cannot be knocked over", and, if horizontal, not to roll. A chain, clamp or stand is a common way to comply.
How many cylinders can a machine shop store without a PESO licence? Under rule 44(b), for own use and not for sale: flammable non-toxic gas up to 25 cylinders or 200 kg of gas, whichever is less; non-flammable non-toxic gas up to 200 cylinders; toxic gas up to 5; and dissolved acetylene up to 25. Above those numbers a licence under rule 43 is needed.
Which OSH Code section covers blocked aisles and exits? Section 6(2)(d) of the OSH Code, 2020: safe places of work and safe "means of access to, and egress from" them. Your state's rules set the detail.
Can an inspector stop part of my shop? Yes. Under section 38(1)(A), where conditions may cause serious hazard or imminent danger, an Inspector-cum-Facilitator can prohibit employing anyone in that part beyond a minimum crew until the hazard is removed, for three days unless the Chief Inspector-cum-Facilitator extends it.
