mama Get a free camera plan ☰

Raw Material Store CCTV Specification: Issue Counter, Receiving, Lens and Camera Count (India)

By The Mama Editorial Team · Factory-floor cameras, India compliance & operations

A raw-material store loses money when material leaves without a slip, so its CCTV is specified from the issue counter outward. As of 14 Oct 2026: Recognise (125 px/m, IEC 62676-4:2014) or better at the issue counter and store exit, Observe (62.5 px/m) at receiving and bulk bays. A 4 MP 3.6 mm dome 3 m up and 4 m back from the counter delivers about 332 px/m; a 1,500 m² store needs about 13 cameras in the worked example below.

Last checked: 14 Oct 2026.

Verified against

Issue counter and receiving: the two views that matter

Material enters at receiving and leaves at the issue counter; everything between is storage. When book and physical stock disagree, the questions are "did it arrive?" and "who took it out?", and only these two views answer them.

Issue slip vs video: what each one proves

Question What the issue slip records What the video must show Level to plan for Counter camera above
Who collected? A signature or a name, written by the store The collector's face at the hand-over Recognise 125 px/m to tell whether the collector is someone seen before; Identify 250 px/m to identify the individual (Axis, IEC 62676-4:2014) ~332 px/m: meets both
What, and how much? Item code and quantity The bags, drums or boxes handed over, countable Observe 62.5 px/m or better at the counter top (our mapping of objects to IEC levels) Meets
When? Time written by hand, if at all The NVR timestamp Any level; NVR clock kept correct (assumption) Depends on NVR clock
Did it leave another way? Nothing Material crossing the exit Recognise 125 px/m inside the door One dome per door

The check: pick a day's slips, open the counter recording at each slip time, match person and quantity. A hand-over on video with no slip is the leak.

Zone spec card

Distances are our calculation from printed HFOV and resolution: max distance = pixels ÷ (px/m × 2 × tan(HFOV/2)), shorter than datasheet DORI claims.

Zone Task the camera must do Target (IEC 62676-4:2014) Example lens from a datasheet Max distance at target (m, our calc) Mount height (assumption) IP / IK Light / IR Count rule
Issue counter to production See each hand-over: who, what Recognise 125 px/m CP Plus CP-UNC-DA41L3C-Q, 4 MP, 3.6 mm, H 78° 13.3 3 m, 4 m back IP67 printed Keep counter lit; colour 1 per counter window
Receiving bay Count bags, drums, pallets in; see inspection Observe 62.5 px/m Same 3.6 mm dome 26.6 4–5 m IP67 printed, no IK printed; ask IK10 if forklift-reachable IR 30 m; 0.03 lux colour 1 overview + 1 per inspection point
Store entry / exit What goes out, aggregated Recognise 125 Same 3.6 mm dome 13.3 ~3 m, inside IP67 printed Door backlight 1 per door
Bulk bay (cement, resin, drums) Same stack still there next week? Observe 62.5 Matrix CIDR50FL28CWP P2, 5 MP, 2.8 mm, H 107.6° 15.2 Corner, 5–6 m IP67; IK10 printed IR 50 m 1 per ~15 m of depth
Rack aisle (low racks) Movement, pallet presence Observe 62.5 CP Plus CP-UNC-TA41L6C-Q, 4 MP, 6 mm, H 49° Observe 47.2; Recognise 23.6 Aisle end, above first beam IP67; no IK printed IR 60 m See below

Rack aisles, briefly. Here racks are a secondary view: movement and pallet presence, not who took it. A 6 mm 4 MP bullet at the aisle end holds Observe to about 47 m, enough for low store racks. A camera below the top beam cannot see the top pallet level; mount near top-beam height if that level matters.

Run your own numbers in the CCTV lens and DORI calculator; the background on the px/m scale and its 2025 replacement is in DORI (IEC 62676-4) explained.

Worked example: a 1,500 m² store

Assumptions, not a survey: a 50 m × 30 m single-storey store; receiving with two shutters and one weighing table; one issue counter; one door; six 25 m rack aisles; a 15 m × 20 m bulk bay; one 50 m cross-aisle. Recording at an assumed 2 Mbps average per camera (H.265); the datasheets cap the stream at 6,144 kbps for the CP Plus fixed models, 8,192 kbps for the CP Plus varifocal and 16 Mbps for the Matrix dome.

Zone Cameras Model type (example) Distance check
Issue counter 1 4 MP 3.6 mm dome ~332 px/m at 5 m slant
Receiving bay 2 4 MP 3.6 mm dome Bay depth under 26.6 m Observe limit
Personnel door 1 4 MP 3.6 mm dome Inside the door, under 13.3 m
Bulk bay 15 × 20 m 2 5 MP 2.8 mm dome, opposite corners ~15 m each at Observe; far edges at the margin with 5–6 m height
Rack aisles (6 × 25 m) 6 4 MP 6 mm bullet 25 m gives ~118 px/m, above Observe, just under Recognise
Cross-aisle 50 m 1 4 MP 6 mm bullet ~59 px/m at the far end, just below Observe
Total 13

Four of the 13 do the reconcile work; nine watch storage.

Storage line Value
Per camera per day at assumed 2 Mbps 21.6 GB
13 cameras per day 280.8 GB
30 days 8.4 TB
30 days if every stream ran at 6,144 kbps (CP Plus fixed-model cap) 25.9 TB

The 8.4–25.9 TB gap is why bitrate is measured on the NVR after install. The CCTV storage calculator handles other retention periods.

Power: every model is 802.3af PoE, with maximum draw printed at 6.8 W (CP Plus TA41L6C-Q), 4.3 W (CP Plus DA41L3C-Q) and "approximately 7 W" (Matrix). The PoE budget is about 79 W at maximum draw, IR included (our arithmetic: 7 × 6.8 + 4 × 4.3 + 2 × 7).

Vendor DORI claims vs the formula

Camera (datasheet) Vendor "Observe" claim (m) Our Observe distance from printed HFOV (m) Ratio
CP Plus CP-UNC-TA41L6C-Q, 6 mm 49.6 47.2 1.05
CP Plus CP-UNC-TA21L6C-Q, 6 mm 34.2 30.1 1.14
CP Plus CP-UNC-DA41L3C-Q, 3.6 mm 30.4 26.6 1.14
Matrix CIDR50FL28CWP P2, 2.8 mm 26 15.2 1.71

What breaks in a factory store

Dock doors and the yard are covered in the loading dock CCTV spec.

When to call the installer / what to ask the vendor

Where Mama fits

Mama reads a factory's existing cameras over RTSP/ONVIF and sends the owner a short morning note on where hours leaked: machine idle time, aggregated, with no names. An issue-counter camera also shows when material leaves for production. More at askthemama.com. Leave an email or phone in the form below.

FAQ

How many cameras does a raw material store need?

No standard gives a per-square-metre rule. Count control points first: one per issue-counter window, one or two at receiving plus one per inspection point, one per door, then storage. The 1,500 m² example came to 13.

Where should the camera at a store issue counter go?

About 3 m up and 4 m back, facing the collector. A 4 MP 3.6 mm dome there gives about 332 px/m, above Recognise (125) and Identify (250).

Can CCTV replace the issue slip?

No. The slip carries the item code and quantity; the video checks it.

Last verified 14 Oct 2026 against the vendor and regulator documents listed above. Found an error? Tell Mama in the form below.

Read next
Free · no obligation

Get a camera plan for your floor

Tell Mama about your plant and Mama will come back with how many cameras you need, where they go, and the retention your state expects — sized to your floor, in ₹. Built for Indian factories.

  • How many cameras & exact placement
  • Compliance-ready (BIS/STQC, women's night shift)
  • Honest ₹ estimate — guard vs camera-AI

Mama replies by email or phone — whichever you left. No spam, no obligation.